NCERT Solutions For Class 11 Biology Plant Growth and Development

NCERT Solutions For Class 11 Biology Plant Growth and Development

Topics and Subtopics in NCERT Solutions for Class 11 Biology Chapter 15 Plant Growth and Development:

Section NameTopic Name
15Plant Growth and Development
15.1Growth
15.2Differentiation, Dedifferentiation and Redifferentiation
15.3Development
15.4Plant Growth Regulators
15.5Photoperiodism
15.6Vernalisation
15.7Summary

NCERT Solutions Class 11 BiologyBiology Sample Papers

NCERT TEXTBOOK QUESTIONS FROM SOLVED

1. Define growth, differentiation, development, dedifferentiation, redifferentiation, determinate growth, meristem and growth rate.
Solution: Growth is defined as a vital process which brings about an irreversible and permanent change in the shape, size, form, weight and volume of a cell, organ or whole organism, accompanied with increase in dry matter.
Differentiation is a localised qualitative change in size, biochemistry, structure and function of cells, tissues or organs, e.g., fibre, vessel, tracheid, sieve tube, mesophyll, leaf etc. Thus it is a change in form and physiological activity. It results in specialisation for particular functions.
Development may be defined as a process which includes growth, differentiation and maturation in a regular sequence in the life history of a cell, organ or organism viz., seed germination, growth, differentiation, flowering, seed formation and senescence. Dedifferentiation is the process by which the differentiated cells which have lost the ability to divide under certain circumstances, become meristematic and regain the divisibility. Redifferentiation is defined as maturation or differentiation of dedifferentiated cells to form cells which are unable to divide e.g., secondary xylem elements, cork cells etc., are formed by redifferentiation of secondary cambial cells.
Determinate growth is the ability of a cell, tissue or the organism to grow for a limited period of time. Meristem is a tissue consisting of unspecialised immature cells, possessing the power of continuous cell division and adding new cells to the body. Growth rate is defined as the increased growth per unit time.

2. Why is not any one parameter good enough to demonstrate growth throughout the life of a flowering plant?
Solution: A flowering plant consists of a number of organs viz., roots, stem, leaves, flowers, fruits etc. growing differently under different stages of life cycle. These plant organs require different parameters to demonstrate their growth. In plant organs like fruits, bulbs, corms etc. fresh weight is used for measuring their growth. In case of fruits, increase in volume, diameter etc., are also used as other parameters for the measurement of their growth. For flat organs like leaves, increase in surface area is used as the parameter. Stem and roots primarily grow in length and then in girth, thus increase in length and diameter are used for measuring their growth. Consequently, the flowering plants exhibit several parameters to demonstrate growth.

More Resources for CBSE Class 11

  • NCERT Solutions
  • NCERT Solutions Class 11 Maths
  • NCERT Solutions Class 11 Physics
  • NCERT Solutions Class 11 Chemistry
  • NCERT Solutions Class 11 Biology
  • NCERT Solutions Class 11 Hindi
  • NCERT Solutions Class 11 English
  • NCERT Solutions Class 11 Business Studies
  • NCERT Solutions Class 11 Accountancy
  • NCERT Solutions Class 11 Psychology
  • NCERT Solutions Class 11 Entrepreneurship
  • NCERT Solutions Class 11 Indian Economic Development
  • NCERT Solutions Class 11 Computer Science

3. Describe briefly
(a) Arithmetic growth
(b) Geometric growth
(c) Sigmoid growth curve
(d) Absolute and relative growth rates
Solution: (a) Arithmetic growth: If the length of a plant organ is plotted against time it shows a linear curve, the growth is called arithmetic growth. In this growth, the rate of growth is constant and increase in growth occurs in arithmetic progression e.g., length of a plant is measured as 2,4, 6, 8,10,12 cms at a definite interval of 24 hrs. It is found in root or shoot elongating at constant rate. Arithmetic growth is expressed as Lt = L0 + rt Here, Lt = length after time t. L0 = length at the beginning, r = growth rate.
ncert-solutions-for-class-11-biology-plant-growth-and-development-1ncert-solutions-for-class-11-biology-plant-growth-and-development-1
(b) Geometric growth: Geometric growth is the growth where both the progeny cells following mitosis retain the ability to divide and continue to do so. It occurs in many higher plants and in unicellular organisms when grown in nutrient rich medium. Number of cells is initially small so that initial growth is slow which is called lag phase. Later on, there is rapid growth at exponential rate. It is called log or exponential phase.
ncert-solutions-for-class-11-biology-plant-growth-and-development-2ncert-solutions-for-class-11-biology-plant-growth-and-development-2
(c) Sigmoid growth curve: Geometric growth cannot be sustained for long. Some cells die. Limited nutrient availability causes slowing down of growth. It leads to stationary phase. There may be actually a decline. Plotting the growth against time will give a typical sigmoid or S-curve.
ncert-solutions-for-class-11-biology-plant-growth-and-development-3ncert-solutions-for-class-11-biology-plant-growth-and-development-3
S-curve of growth is typical of most living organisms in their natural environment. It also occurs in cells, tissues and organs of plants.
(d) Absolute growth rate is the measurement of total growth per unit time.Relative growth rate is growth per unit time per unit initial growth.
Growth in given time period/ Measurement at start of time period
Suppose two leaves have grown by 5 cm2 in one day. Initial size of leaf A was 5 cm2 while that of leaf B was 50 cm2. Though their absolute growth is the same (5 cm2/day), relative rate of growth is faster in leaf A(5/5) because of initial small size than in leaf B(5/50).

4. List five main groups of natural plant growth regulators. Write a note on discovery, physiological functions and agricultural/ horticultural applications of any one of them.
Solution: There are five main groups of natural plant growth regulators which are very much recognised as natural hormones in plants. These are:

  1.  Auxins
  2. Gibberellins
  3. Cytokinins
  4. Abscisic acid
  5. Ethylene

Discovery of auxin: In 1880, Charles Darwin and Francis Darwin worked with the coleoptile of canary grass (Phalaris sp.) and found the existence of a substance in coleoptile tip, which was able to recognise the light stimulus and leads to the bending of tip towards light. Boysen and Jensen (1910-1913) worked on Avena seedling and explained that the substances secreted in the tip are soluble in water (gelatin).
Paal (1919) reported that the substances secreted in the tip are translocated downwards and caused cell elongation in half portion which was on the dark side and hence bending was observed in opposite direction.
F.W. Went (1928) further refined this experiment and supported the observations of Paal. He was the first person to isolate and name these substances of tip as auxins (Greek Auxein – means ‘to grow’).
In 1931, Kogl and Haagen-Smith isolated
crystalline compounds from human urine.
These were named as auxin-a, auxin-b and
heteroauxin.

Physiological functions of auxins:

  1. Auxins induce cambial cell divisions, shoot cell elongation and early differentiation of xylem and phloem in tissue culture experiments.
  2. In general, auxins initiate rooting but inhibit the growth of roots. IBA is the most potent root initiator.
  3. Auxins inhibit the growth of axillary buds (apical dominance) but enhance the size of carpel and hence earlier fruit formation.
  4. Application of auxins retards the process of senescence (last degradative phase), the abscission of leaves, fruits, branches, etc.
  5. Auxins induce feminisation, i.e., on male plant, female flowers are produced.

Agricultural/horticultural application of auxins:

  1. Application of auxins like IAA, IBA, NAA induce rooting in stem cuttings of many plants. This method is widely used to multiply several economically useful plants.
  2. Normally, auxins inhibit flowering however in litchi and pineapple, application of auxin promotes flowering thus used in orchards.
  3. Auxin induces parthenocarpy in some plants including tomato, pepper, cucumber and Citrus, thus, produces seedless fruits of more economic value.
  4. Auxins like 2, 4-D and 2, 4, 5-T are commercially used as weedicides, due to their low cost and greater chemical stability. They are selective herbicides (killing broad-leaved plants, but not grasses).
  5. For checking premature fruit drop, auxins are applied which prevent the formation of abscission zone in the petiole or just below the fruit. Auxin regulates maturing fruit on the trees of apples, oranges and grape fruit. High doses of auxins can
    cause fruit drop. Thus, heavy applications of synthetic auxins are used commercially to promote a coordinated abscission of various fruits to facilitate harvesting.
  6. Auxin, produced in the apical bud, suppresses the development of lateral buds, i.e., apical dominance. Thus practically used in prolonging the dormancy period of potato tubers.
  7. Naphthalene acetamide is used to prevent the lodging (excessive elongation and development of weak plants, specially in gramineae) or falling of crops.
  8. Auxin (2,4-D) promotes callus formation in tissue culture. Complete plantlets are regenerated from callus tissue, using auxins and cytokinin which are then transplanted into the soil. Now-a-days, this is a widely practised method of propagation in the field of agriculture and horticulture.

5. What do you understand by photoperiodism and vernalisation? Describe their significance.
Solution: The physiological mechanism for flower-ing is controlled by two factors: photoperiod or light period, i.e., photoperiodism and low temperature, i.e., vernalisation. Photoperiodism is defined as the flowering response of a plant to relative lengths of light/ dark period. Significance of photoperiodism is as follows:

  1. Photoperiodism determines the season in which a particular plant shall flower. For example, short day plants develop flowers in autumn-spring period (e.g., Dahlia, Xanthium) while long day plants produce flowers in summer (e.g., Amaranthus).
  2. Knowledge of photoperiodic effect is useful in keeping some plants in vegetative growth (many vegetables) to obtain higher yield of tubers, rhizomes etc. or keep the plant in reproductive stage to yield more flowers and fruits.
  3. A plant can be made to flower throughout the year by providing favourable photoperiod.
  4. Helps the plant breeders in effective cross-breeding in plants.
  5.  Enable a plant to flower in different seasons.
    Vernalisation is promotion or induction of flowering by exposing a plant to low temperature for some time. Significance of vernalisation is as follows :
    (i) Crops can be grown earlier.
    (ii)Plants can be grown in such regions where normally they do not grow.
    (iii)Yield of the plant is increased.
    (iv)Resistance to cold and frost is increased.
    (v) Resistance to fungal diseases is increased.

6. Why is abscisic acid also known as stress hormone?
Solution: A fairly high concentration of abscisic acid (ABA) is found in leaves of plants growing under stress conditions, such as drought, flooding, injury, mineral deficiency etc. It is accompanied by loss of turgor and closure of stomata. When such plants are transferred to normal conditions, they regain normal turgor and ABA concentration decreases. Since the synthesis of ABA is accelerated under stress condition and the same is destroyed or inactivated when stress is relieved, it is also known as stress hormone.

7. ‘Both growth and differentiation in higher plants are open’. Comment.
Solution: Plant growth is generally indeterminate. Higher plants possess specific areas called meristems which take part in the formation of new cells. The body of plants is built on a modular fashion where structure is never complete because the tips (with apical meristem) “are open ended – always growing and forming new organs to replace the older or senescent ones. Growth is invariably associated with differentiation. The exact trigger for differentiation is also not known. Not only the growth of plants are open- ended, their differentiation is also open. The same apical meristem cells give rise to different types of cells at maturity, e.g., xylem, phloem, parenchyma, sclerenchyma fibres, collenchyma, etc. Thus, both the processes are indeterminate, unlimited and develop into
different structures at maturity i.e., both are open.

8. ‘Both a short day plant and a long day plant can produce flower simultaneously in a given place’. Explain.
Solution: A short day plant (SDP) flowers only when it receives a long dark period and short photoperiod, e.g., Xanthium, Dahlia etc. On the other hand, a long day plant (LDP) will flower only when it receives a long photoperiod and short dark period, e.g., wheat, oat etc. Thus critical photoperiod is that continuous duration of light which must not be exceeded in SDP and should always be exceeded in LDP in order to bring them to flower. Xanthium requires light for less than 15.6 hrs and Henbane requires light for more than 11 hrs. Xanthium (a SDP) and Henbane (DP) will flower simultaneously in light period between 11 to 15.6 hrs.

9. Which one of the plant growth regulators would you use if you are asked to
(a) induce rooting in a twig
(b) quickly ripen a fruit
(c) delay leaf senescence
(d) induce growth in axillary buds
(e) ‘bolt’ a rosette plant
(f) induce immediate stomatal closure in leaves.
Solution: (a) Auxins like IBA, NAA.
(b) Ethylene
(c) Cytokinins
(d) Cytokinins
(e) Gibberellins
(f) Abscisic acid (ABA)

10. Would a defoliated plant respond to photo- periodic cycle? Why?
Solution: No, a defoliated plant would not respond to photoperiodic cycle because photoperiodic stimulus is picked up by the leaves only. Even one leaf or a part of it is sufficient for this purpose. For perception of photoperiodic cycle, there must be the presence of leaves under inductive photoperiod, so that, the hormone responsible for flowering can be produced.

11. What would be expected to happen if:
(a) GA3 is applied to rice seedlings
(b) dividing cells stop differentiating
(c) a rotten fruit gets mixed with unripe fruits
(d) you forget to add cytokinin to the culture medium.
Solution:
(a) The coleoptile will elongate rapidly, as GA3 helps in cell growth.
(b) The development of callus (mass of undifferentiated cells) will take place.
(c) The unripe fruits will ripe quickly because of the increased rate of respiration due to emission of ethylene from rotten fruit.
(d) Cell division will retard and shoot will not initiate from the callus.

<!– –>

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.